How to make a house bunkers Paintball
Paintball is very popular today because it is in more than 75 countries around the game world. This sport regarded as an action game that sport where the teams with a minimum of three members in competition with other uses of paint cover shoot in a shell of gelatin. In this article we will try to make the process of building a bunker in the paintball field.
First, we will find a list of items you need to bunkering to create:
– 18thtape
– Jigsaw
– Metro
– Protective goggles
– 12-pin, 12 "high
– A strong glue
– Snail blocks (if necessary)
– Mallet or hammer
– Piece of plywood, 5 "wide x 6" long
– Horse blanket
– Keyhole see / so
The first part of building a bunker Paint Ball is building the wall. For this, three bands put on the floor, wash them together on a 45 degree angle. The next thing to do is to stack two tapes on topwhat you have first, to form three columns. It is now necessary to measure 5 "at the end of the columns first band and the rest of the band in the same way you did with the remaining stake.
The second and most important part is the construction and acquisition of the wall paintball bunkers. First step is to move the plywood in place by the long side on the floor in front of the column band, so that one side is about two inches of front tires. Phase two ishammering nails right in front of the plywood, so they are level, from the end and toward the center.
Step 3 – slag heap blocks three blocks high in the light of plywood that runs horizontally from a base along the entire length of the plywood. The next step will be to a base of cinder blocks to support the right plywood with smooth walls and make the basis of three rows back. Your fifth and final step is to connectslug three blocks up on the back of plywood and two high on the back of the front row, but is careful to stick to the sides of slag blocks upward.
The next three further steps are optional:
First Cut four small holes you had seen the back of the plywood about an inch cinder blocks placed near the two parties and two near the center;
According Make thick lines on top of cinder blocks on the first seriesbehind the plywood. Repeat the process to second base. This step requires the use of glue;
Third Place horse blanket of lava blocks and push them into glue. Under pressure from the top and second base.
The bunker can be done with old tires, pieces of plywood or whatever you have available. You can additional hole when you need it. The holes cut in plywood for your rifle barrel throughShooting your enemies through cover secure.
As you can see that the process of building a bunker paintball ground is not so difficult and requires no special items. Have fun building and use of bunkers to your advantage in a paintball battle.